Sextic centrifugal distortion constants: interplay of density functional and basis set for accurate yet feasible computations

Quantum-chemical calculations assist the analysis of laboratory spectra, and often provide the only means to determine spectroscopic data that cannot be accessed experimentally. Accurate predictions of vibrational and rotational spectroscopic parameters are required for applications in the field of high-resolution molecular spectroscopy. While the accuracy issue of the quantum-chemical calculation of vibrational properties and of equilibrium structures has been addressed in the literature, the same is not true for centrifugal distortion constants that however play an essential role for the interpretation of remote sensing data. In this work, the performance of several model chemistries, rooted mainly in density functional theory, in computing sextic centrifugal distortion constants is assessed employing a benchmark set of molecules of both atmospheric and astrochemical relevance. The Jensen’s (aug-)pcs-n basis sets, different flavours of Dunning’s triple-ζ basis sets and the SNSD basis set, are employed in conjunction with different functionals, and their predictions are benchmarked against experimental and theoretical data at the coupled cluster level of theory. This study also demonstrates the reliability of the calculation of sextic centrifugal distortion constants within the Gaussian16 rev. B.01 program package. Reliable predictions of the sextic centrifugal distortion constants for the gauche- and trans-conformers of ethyl-mercaptan are also presented.     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

焦炉上升管内壁结焦炭层的光谱学分析及结焦机理研究

以焦炉上升管内壁结焦炭层块为研究对象，采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）、傅里叶红外光谱仪（FTIR）和激光共聚焦拉曼光谱仪（Raman）对结焦炭层的元素组成，以及各结焦炭层的矿物组成、组成结构和分子结构进行测试。分析从结焦炭层块外表面向内表面过渡的各结焦炭层的差异性，揭示焦炉上升管内壁结焦机理。结果表明焦炉上升管内粉尘中Fe，S和Cr极易催化荒煤气中蒽、萘等稠环芳烃化合物成炭，在焦炉上升管内壁形成炭颗粒沉积，为焦油凝结挂壁提供载体，在荒煤气温度降至结焦温度时易结焦积碳。结焦炭层均含有芳香层结构，随着结焦炭层从外表面向内表面过渡，各结焦炭层的面层间距(d₀₀₂)逐渐降低、层片直径(L_a)先降低后增加、层片堆砌高度(Lc)和芳香层数(N)先稳定后增加。结焦炭层石墨化过程是由结焦炭层内表面向外表面进行，主要包括其片层外缘的羧基和部分C-O结构的降解剥离，从而形成高度规整的共轭结构。结焦炭层块中C元素是以结晶碳与无定型碳的混合物形式存在。以上研究为解决焦炉上升管内壁结焦及腐蚀问题，提高换热器换热效率，有效回收焦炉荒煤气显热，降低焦化企业能耗提供实验基础和理论依据。     

Determining the Zn Content of Cherry in Field Using VNIR Spectroscopy

Visible and near-infrared(VNIR)spectroscopy is an eco-friendly method used for estimating plant nutrient deficiencies.The aim of this study was to investigate the possibility of using VNIR method for estimating Zn content in cherry orchard leaves under field conditions.The study was conducted in 3different locations in Isparta region of Turkey.Fifteen cherry orchards containing normal and Zn deficient plants were chosen,and 60 leaf samples were collected from each location.The reflectance spectra of the leaves were measured with an ASD FieldSpec HandHeld spectroradiometer and a plant probe.The Zn contents of leaf samples were predicted through laboratory analysis.The spectral reflectance measurements were used to estimate the Zn levels using stepwise multiple linear regression analysis method.Prediction models were created using the highest coefficient of determination value.The results show that Zn content of cherry trees can be estimated using the VNIR spectroscopic method(87.5相似文献   

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

Bioactive constituents of Iris hybrida (Iridaceae): Processing effect

Iris genus plants are a valuable source of bioactive compounds, which are an important component for pharmaceutical development. The present article shows the potential for mineral nutrition with application of magnesium sulfate, iron chelates and potassium oxide affecting the phenolic compound contents in Iris hybrida ‘Tsikavynka’, I. hybrida ‘Tambo’ and I. hybridа ‘Widecombe Fire’. The effect of mineral processing was specific to plant organs and varied in the component composition. The Iris rhizomes had an increased total phenolic compound content after treatment (up to 10% of the total isoflavonoid content, up to 8% of phenolic acids, up to 5% of γ-pyrones and up to 13% of flavonoids), determined using UV–vis spectroscopy. A positive effect of nutrition on the biosynthesis and content of individual isoflavonoids (tectoridin, nigricin d -glucoside, genistin, iristectorigenin B, nigricin, irigenin and irisolidone) and xanthone mangiferin in Iris rhizomes by HPLC was established. In addition, an increase in the chlorogenic acid amount in Iris leaves was noted. The results demonstrate the sensitivity of Iris phenylpropanoid metabolism to mineral nutrition and can be used to predict medical plant cultivation with increased content of bioactive constituents.     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

基于ELM算法的羊肉水分含量的快速无损检测

在近红外光谱900-1700nm的波长范围内采集南疆羊肉的光谱数据,来研究水分含量的快速无损检测.为减弱非目标因素对光谱的影响,采用SNV和去趋势法对光谱数据进行预处理.为降低建模的复杂度,去除共线性的影响,采用连续投影算法和相关系数法相结合选取8个特征波长变量,最后使用PLS和ELM算法分别进行建模.实验表明,与采用全光谱波段建模相比,采用特征波长变量建模,PLS和ELM算法的运行时间都大大缩短,并且在运行时间和预测精度上,ELM算法均优于PLS算法.ELM算法采用8个特征波段变量建模,预测精度达到0.9768,均方误差为4.4291e-04,相关系数为0.7603,运行时间可控制在1e-04s之下,这可为研发羊肉水分含量的便携式检测装置提供理论参考.     

Sub‐ and Supramolecular X‐Ray Characterization of Engineered Tissues from Equine Tendon,Bovine Dermis,and Fish Skin Type‐I Collagen

Collagen represents one of the most widely used biomaterial for scaffolds fabrication in tissue engineering as it represents the mechanical support of natural tissues. It also provides physical scaffolding for cells and it influences their attachment, growth, and tissue regeneration. Among all fibrillary collagens, type I is considered one of the gold standard for scaffolds fabrication, thanks to its high biocompatibility, biodegradability, and hemostatic properties. It can be extracted by chemical and enzymatic protocols from several collagen‐rich tissues, such as tendon and skin, of different animal species. Both the extraction processes and the manufacturing protocols for scaffolds fabrication provide structural and mechanical changes that can be tuned in order to deeply impact the properties of the final biomaterial. The aim of this review is to discuss the role of X‐rays to study structural changes of type I collagen from fresh collagen‐rich tissues (bovine, equine, fish) to the final scaffolds, with the aim to screen across available collagen sources and scaffolds fabrication protocols to be used in tissue regeneration.